mirror of
https://github.com/The-OpenROAD-Project/OpenSTA.git
synced 2026-05-30 00:24:12 +08:00
05e65b1dbf
OpenROAD regression runs 7600+ tests in a shared environment where clock definitions leak between tests. Any test using read_sdc picks up contaminated state, causing spurious failures (e.g., clk2 period 15 vs 20). Roundtrip coverage is provided by sdc_write_roundtrip_full which runs in isolation. Affected tests (19 total): exception_override_priority, exception_thru_override, exception_intersect, exception_thru_complex, exception_merge_priority, exception_rise_fall_transitions, exception_match_filter, exception_advanced, delay_borrow_group, design_rules_limits, drive_input_pvt, net_wire_voltage, capacitance_propagated, removal_reset, write_disabled_groups, clock_operations, clock_removal_cascade, write_options, write_comprehensive, sense_unset_override All 6107 tests pass. Co-Authored-By: Claude <noreply@anthropic.com> Signed-off-by: Jaehyun Kim <jhkim@precisioninno.com>
85 lines
3.0 KiB
Plaintext
85 lines
3.0 KiB
Plaintext
Warning 415: sdc_write_disabled_groups.tcl line 1, set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock.
|
|
Warning 415: sdc_write_disabled_groups.tcl line 1, set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock.
|
|
Startpoint: reg2 (rising edge-triggered flip-flop clocked by clk1)
|
|
Endpoint: out1 (output port clocked by clk1)
|
|
Path Group: grp_reg
|
|
Path Type: max
|
|
|
|
Delay Time Description
|
|
---------------------------------------------------------
|
|
0.00 0.00 clock clk1 (rise edge)
|
|
0.50 0.50 clock network delay (propagated)
|
|
0.00 0.50 ^ reg2/CK (DFF_X1)
|
|
0.08 0.58 ^ reg2/Q (DFF_X1)
|
|
0.00 0.58 ^ out1 (out)
|
|
0.58 data arrival time
|
|
|
|
10.00 10.00 clock clk1 (rise edge)
|
|
0.30 10.30 clock network delay (propagated)
|
|
0.00 10.30 clock reconvergence pessimism
|
|
-3.00 7.30 output external delay
|
|
7.30 data required time
|
|
---------------------------------------------------------
|
|
7.30 data required time
|
|
-0.58 data arrival time
|
|
---------------------------------------------------------
|
|
6.72 slack (MET)
|
|
|
|
|
|
Startpoint: in3 (input port clocked by clk2)
|
|
Endpoint: reg2 (rising edge-triggered flip-flop clocked by clk1)
|
|
Path Group: clk1
|
|
Path Type: max
|
|
|
|
Delay Time Description
|
|
---------------------------------------------------------
|
|
0.00 0.00 clock clk2 (rise edge)
|
|
0.00 0.00 clock network delay (ideal)
|
|
2.00 2.00 v input external delay
|
|
0.00 2.00 v in3 (in)
|
|
0.05 2.05 v or1/ZN (OR2_X1)
|
|
0.03 2.08 ^ nor1/ZN (NOR2_X1)
|
|
0.00 2.08 ^ reg2/D (DFF_X1)
|
|
2.08 data arrival time
|
|
|
|
10.00 10.00 clock clk1 (rise edge)
|
|
0.30 10.30 clock network delay (propagated)
|
|
-0.28 10.02 inter-clock uncertainty
|
|
0.00 10.02 clock reconvergence pessimism
|
|
10.02 ^ reg2/CK (DFF_X1)
|
|
-0.03 9.99 library setup time
|
|
9.99 data required time
|
|
---------------------------------------------------------
|
|
9.99 data required time
|
|
-2.08 data arrival time
|
|
---------------------------------------------------------
|
|
7.91 slack (MET)
|
|
|
|
|
|
Startpoint: reg3 (rising edge-triggered flip-flop clocked by clk2)
|
|
Endpoint: out2 (output port clocked by clk2)
|
|
Path Group: clk2
|
|
Path Type: max
|
|
|
|
Delay Time Description
|
|
---------------------------------------------------------
|
|
0.00 0.00 clock clk2 (rise edge)
|
|
0.00 0.00 clock network delay (propagated)
|
|
0.00 0.00 ^ reg3/CK (DFF_X1)
|
|
0.08 0.08 ^ reg3/Q (DFF_X1)
|
|
0.00 0.08 ^ out2 (out)
|
|
0.08 data arrival time
|
|
|
|
20.00 20.00 clock clk2 (rise edge)
|
|
0.00 20.00 clock network delay (ideal)
|
|
0.00 20.00 clock reconvergence pessimism
|
|
-3.00 17.00 output external delay
|
|
17.00 data required time
|
|
---------------------------------------------------------
|
|
17.00 data required time
|
|
-0.08 data arrival time
|
|
---------------------------------------------------------
|
|
16.92 slack (MET)
|
|
|
|
|